The Range Rover is a high-quality vehicle that provides drivers with years of awesome driving. Buying a used one is one of the best ways to get an incredible SUV. However, used vehicles of this type often have air suspension problems. Here's what you need to know about this issue and what you can do to fix it.
The Air Suspension Often Fails On This Vehicle
While the air suspension of the Range Rover has become even better over the years and doesn't suffer from as many problems as it did in the past, it might still give out from time to time. When this failure occurs, your Range Rover is going to be a dangerous vehicle to drive.
The exact cause of this failure will vary depending on your vehicle. In most cases, it is the failure of a single component that causes the air suspension to fall apart on you. Of these components, problems with the airbag are probably the most common issue you are going to face.
The Airbags Are The Common Issue
There are many different components that make up the air suspension in a Range Rover. The most important of these elements are likely the airbags that sir on the four corners of the vehicle. They inflate and deflate to adjust the wheelbase and its height. These simple airbags don't require a lot of adjustment to operate but may malfunction.
When they malfunction, you are in a tricky situation. That's because the air suspension may fail to operate properly if you aren't careful. Thankfully, they can usually be replaced without a lot of excessive work. However, it is important to take several steps before starting, including a system depressurization.
Depressurizing Is Crucial
Before working on the air bags in a Range Rover, it is important to take the time to depressurize the air tank. Failure to take this step can be dangerous because it can put the well-being of your vehicle in serious risk. It can cause damage to many of its systems and, even worse, put your life at risk by causing a serious blowout that could hit you and injure you severely.
This step is usually quite simple and doesn't require a lot of work. Simply find the drain plug in your Range Rover air suspension and slowly unscrew the drain plug. Go one notch on the screw at a time until you hear air start to escape. Stop opening the valve at this point or you run the risk of the plug flying out of the system like a bullet.
If this step sounds too difficult for you to do on your own, there is no shame in looking for help. There are many specialists near you who can perform this procedure without difficulty. Talk to a company like British 4x4 to learn more about how to fix your air suspension and keep your Range Rover running.
Share